Solved by: AllAcademicHelp.com
1. IntroductionIn this assignment, you are
to implement a console application that supports simple MAP (Mean
Arterial Pressure) analysis functionality. A phased implementation
approach is recommended and an outline for such an approach is provided
in Appendix 1. The application is to be conformant with the class
diagram provided in Figure 1.
CookMyProject2. The ApplicationThe
raw data to be analysed is to be stored in 3 arrays. Use array
initialisers to specify initial values of your choosing. The 3 arrays
are to contain person identifiers (string values), systolic blood
pressure (SBP) and diastolic blood pressure (DSP). Both SBP and DSP are
to be specified as int values. MAP is determined from an individual’s
blood pressure using the following formula:MAP = 1.0/3.0 * SBP + 2.0/3.0 * DBP
raw data is to be used to create objects of type Record, which are to
be stored in an array of type Record. The Record class is to conform to
the class shown in the UML Diagram below:
that in Figure 1, the visibility of class methods and attributes are
designated as + (public) and – (private). Associations are annotated
with a label (for readability) and multiplicity. The multiplicity
captures the number of object instances that can be involved in the
association. In this case, only two values apply – 1 and *, which means
many. While map is calculated as a floating point value, it is to be
stored as an int value. In addition to the map attribute, Record also
has a category attribute, which has values of “high”, “medium” and
“low”. A normal mean arterial pressure is a value in the range 70 and
100 mmHg inclusive.Category determination is to be provided as a
separate (private) method called classify(). Creation of the Record
array is to occur when the MAPAnalyser object is created, using a
private method called loadFromTables(). In order to facilitate search,
records are to be maintained in ascending order of person id. Sorting is
to be done after record creation, using a private method called
sortById(). This method must implement the selection sort algorithm.
Both loadFromTables() and sortById() are to be invoked from the
constructor for the MAPAnalyser class.
The application’s View class is to execute (using a switch statement) the following command options:1. Display the record for a specified person2. Display records for all persons with MAP values within a specified range. 3. Display the minimum, maximum and median MAP values4. Exit the application
it is a console application, the user will need to be prompted to enter
a command and its arguments (if any). My personal preference is for a
minimal interaction scheme, as shown below:run:The following commands are recognised Display this message > 0 Display a specific subject record: > 1 id Display records for all subject records within a range > 2 map1 map2 Display statistics (minimum, maximum and median) > 3 Exit the application > 9> 1 S01<S01,120,81,94.0, normal>>Feel free to adopt the above scheme or if you prefer, implement a more verbose interaction scheme.Note that 1. Each command is designated a number2. Command 1 requires a single argument – the subject id3. Command 2 requires 2 arguments – the lower and upper bounds of a range of MAP values. 4. I have added a “help” command (command 0)5.
The command options are displayed at the start of the application and
whenever a “help” command is entered, rather than after each command.6. Records are displayed (with no explanation of the fields) using Record.toString()7. The median value is the middle value in a list of sorted values
For the commands that require arguments note thata.
For commands 1 and 2, basic error checking is expected. For command 1,
an error message is to be displayed if an id does not exist. For
command 2, an error message is to be displayed if a member of the range
is < 0 or > 200 or if the second member of a range is less than
the first member. b. For command 2, the range is inclusive of the values specified. Consequently, having both members of a range equal is valid. c. For command 1, binary search is to be used.d.
For command 2, the results are to be stored in an array for display. If
no values are found, an appropriate message is to be displayedThe application must conform to the class diagram in Appendix 1, although additional private members and methods are permitted.
3. SubmissionYou are to submit a zipped folder containing • Your zipped NetBeans project folder. Details of how to do this are available in the NetBeans FAQ on the unit website.• Report.docx. This file is to contain the following Sections:1. Limitations2. Test plan3. Test resultsStudent name, student ID number, unit name and unit code are to be included on the title page. The limitations section is to specify any limitations that your program has in terms of calculations and data validation. The
test plan is to contain a comprehensive list of program functionality
to be tested, the input values to be used to test each item of
functionality, the expected output from the test and the actual output
from the test. The test results section is to contain screenshots to
demonstrate that the program generates the actual outputs shown in the
Let’s block ads! (Why?)
READY TO PLACE AN ORDER